As an improvement over its predecessor (DP-D Series), the DP-D Gen2 Series high performance power supply has been enhanced with a next generation digital control unit, which is immediately apparent from the large and informative display on the front panel. All important actual and setpoint values are clearly displayed and settings can be quickly accessed. In addition, units with option [Y] have a large color display with 4.3″ diagonal and offer the possibility to program complex test sequences by configuring current/voltage/rise time in relation to time (square wave output, …) and to observe the actual values over time. Furthermore, option [Y] expands the connectivity by adding a LAN port and a USB (host) port on the front panel.
Designed for high-performance laboratory or industrial applications, the DP-D Gen2 series high-performance power supply is designed for 24/7 continuous operation, completely maintenance-free. Laboratory power supplies of this series can be manufactured on request with output power up to the megawatt range and configured with a variety of options. Depending on the configuration, DP-D Gen2 Series high-performance power supplies can be completely externally analog or digitally controlled and are available as either Stand-Alone or Rack-Mount versions, allowing for easy integration into existing infrastructures.
The following is a brief description of the possible additional options for high-performance power supplies of the DP-D Gen2 series. A detailed description can be found in the datasheet of the series, should you have any questions contact our support during our opening hours via the live chat or by e-mail and we will gladly assist you.
[Z1] ACCESSORY: 2m Cable with SCHUKO, CEE Plug male blue 32A or red 32A
The laboratory power supply will be supplied with a 2m connection cable and matching plug:
Output power ≤ 3300W – SCHUKO
Output power > 3300W – CEE plug Blue 32A 230V
Output power ≥ 6000W – CEE plug Red 32A 400V
[E] 19 Inch Rack-Mount Version
The laboratory power supply comes with rack-mount brackets (models below 10kW only).
[U] Ext. analog control U
Input for external control of the output voltage via an analog control signal.
[L] Ext. analog control I
Input for external control of the output current via an analog control signal.
[F] Ext. analog feedback U
Returns the actual value of the output voltage.
[G] Ext. analog feedback I
Returns the actual value of the output current.
[A] Interlock & Ext. Output On/Off Ctrl.
Input for controlling the status of the output of the laboratory power supply (on / off), switchable as “Interlock” or external control.
[R] Reverse current protection
Reverse current protection when operating with large inductive or capacitive loads.
[V] Polarity switch
Allows turning the output polarity during operation.
[S] Remote Sensing
Measuring the voltage at the load and compensating line losses.
The high performance power supply is enhanced by a 4.3″ color display and a even more advanced digital control unit. In addition to the standard connectivity (RS232, RS485), a LAN port and USB (host) are built in. The advanced control unit allows the power supply to be programmed autonomously with complex voltage / current curves over time.